Product Dimensions:

Maximum inflated level is 12” in height and 18” Wide, i.e. 18 x 12 x 18 inches

NOTE: The 1stClassKid+ Travel pillow has a combined inflation/deflation valve that must be used correctly to avoid difficulty when deflating.  It is highly recommended that you practice these steps at home prior to using the 1stClassKid pillow on a flight.  You may need to wait until you are at cruising level.  The reason for this is that the cabin pressure will have stabilized.  DO NOT fill to max as this will cause some difficulty placing your pillow between the seats.  It is recommended that you place the pillow almost inflated then finish inflation by mouth.  Please take caution as you will be at altitude so take breaks if blowing manually.

The inflation valve has a one-way valve that keeps air from exiting the pillow while you are pausing to take a breath.  It is not complex but care must be taken as deflation of the pillow is virtually impossible unless you remove the deflation cover as described below.

The combination inflation/deflation valve is designed to be pushed into the pillow when inflated.  This should be the default position of the valve when received.  When deflated, the valve can be pushed out from behind to gain easier access to the inflation tube.  Once inflated the valve can be pushed in or left out to allow easy access to the valve covers and body.

Inflation Instructions:
The removable inflation/deflation valve has a one-way valve that keeps air from exiting the pillow while you are pausing to take a breath.  While it is possible to inflate the pillow completely by mouth through the inflation valve, experience has proven that the best way to inflate 1stClassKid+ Travel pillow is to follow these steps –

Start with the deflation valve removed.  With the valve removed there is a gaping hole that will allow air to easily enter (or exit) the pillow.

Next, pull out the corners of the pillow and form it into shape.  By doing this, it should be at least half full then hold up to your planes ventilation system above you.

If there is no forced air options screw in the inflation value and complete inflation by mouth.  Please take caution as you will be at altitude so take breaks when blowing manually.

The inflation valve has a one-way valve that keeps air from exiting the pillow while you are pausing to take a breath.

Please refer to instruction booklet that came with your pillow or download instructions here.

Newer aircraft no longer have the older ventilation systems hence, for manual inflation please take a look at our video here for quick and easy instructions.

 http://www.1stclasskid.com/wp-content/uploads/2015/manual_inflation.wmv

NOTE: HOW TO POP OUT THE VALVE

When you receive your pillow the valve is pushed in for packaging purposes. 

It is highly recommended that you practice manual inflation at home prior to using. 

To inflate it is easier if the valve is pushed out.  If it is difficult to pop out please warm up the plastic that surrounds the valve either by a hair dryer http://youtu.be/tr6RMs7FZvU   

OR with the valve closed surround it with hot water.   Both options only need less than a minute to work.  You can find hot water info under Trouble Shooting on our website.

*For international orders, please feel free e-mail us for a quotation of the shipping cost.